Liners & Vapor Barriers

Below each type of installations is the recommended type of liner material and available weights. Click on the categories below to see the the specifications.

All material is factory seamed to agreed upon manageable sizes and weight.

Stream Liners | Pond Liners | Underlayment Liners | Water Fall Backing |Tank Liners | Pond Liners | Retention Ponds | Planter or Street Tree Liners | Containment or Directional Flow Liners | Vapor Barriers | Roof Garden Membrane

STREAM LINERS - 20, 30, or 40-mil PVC (if covered) 36 or 45-mil Reinforced Polypropylene (RPP) (if exposed).

POND LINERS - These are liners that are placed under landscaping ponds, fish ponds or industrial ponds. They can be made from any of the material types.

20, 30, or 40-mil PVC (if covered) 36 or 45-mil Reinforced Polypropylene (RPP) (if exposed).

UNDERLAYMENT LINERS - Typically 4 - 12 oz. geotextile.

WATER FALL BACKING - 20, 30, or 40-mil PVC (if covered) 36 or 45-mil Reinforced Polypropylene (RPP) (if exposed).

TANK LINERS - These liners serve as a storage device with in a primary storage container. These can be made from any of the liner materials.

36 or 45-mil Reinforced Polypropylene.

- Raw Water Tanks - 20, 30, or 40-mil PVC (if covered) 36 or 45-mil Reinforced Polypropylene (RPP) (if exposed).

- NSF Approved Liners - #8130 / 30mil, #8138 / 40 mil, potable water grade, Hypalon, Reinforced Polypropylene.

- Chemical - #8130 / 30mil, #8138 / 40mil, XR-5 (depending on chemicals).

PONDS LINERS - 30mil Fish grade PVC, 36 or 44mil Reinforced Polypropylene.

- Standard Liners -20, 30, 40mil PVC Covered

- Fish Safe Liners - 30, 36, or 45mil Reinforced Polypropylene fish grade PVC.

RETENTION PONDS (WET OR DRY) - 20, 30, or 40-mil PVC (if covered) 36 or 45-mil Reinforced Polypropylene (RPP) (if exposed).

PLANTER OR STREET TREE LINERS - 20 OR 30mil PVC.

CONTAINMENT OR DIRECTIONAL FLOW LINERS - This new Tank Gardian becomes a permanent or temporary system around tanks storing potentially hazardous material. This can be made from any of the liner materials.

30 or 40mil XR-5 (for hydrocarbons), 30 - 40mil PVC (if covered), 36 - 45mil Reinforced Polypropylene (if exposed).

VAPOR BARRIERS (CUSTON CUT TO SIZE)- This is typically used as a moisture barrier between two spaces where a you do not want a substance to penetrate. This can be made from any of the material types.

20mil PVC for Crawl Spaces, Floor Underlayment; Walls; Conventional or Buried Structures.

ROOF GARDEN MEMBRANE - 36 - 45mil Reinforce Polypropylene in connection with Eljen Composite Drains.

Tel: 303-595-8722
Fax: 303-893-9161
E-mail: Masterdistinc@eschelon.com